Tag Archives: Ardex

DIY Concrete Pedestal Table

Ever since I found my tulip chair and read that Eero Saarinen designed his pedestal collection as a remedy for the “slum of legs” he observed under tables and chairs, I’ve looked at my house a little differently.  When I started searching for a table to place between the two chairs in our living room I knew I had to choose one that could revolt against the legginess, the slumminess, rampant in the room. Red House West//DIY Concrete Pedestal Table The search was harder than I expected, despite the fact that I scoured thrift stores with the single-minded ferocity of a honey badger.  The prolonged search did give me ample time to imagine exactly what I wanted (not always a good thing when you’re hunting among people’s cast-offs), and it looked something like this:

After months of fruitless hunting I decided to manifest my own un-slummy destiny out of a trash can from our laundry room, a rickety $5 Craigslist table, and a generous helping of Ardex Feather Finish (left over from the backsplash). Red House West//DIY Concrete Pedestal Table But let’s back up a little bit.  Here is what I started with – the ‘before,’ if you will: Red House West//DIY Concrete Pedestal Table I unscrewed the legs from the table and removed the brackets.  Cameron and I measured to the center of the table top then used a compass to mark where to affix the trash can.

Just to be clear: those are Cameron's man hands, not mine.

Just to be clear: those are Cameron’s man hands, not mine.

After screwing the trash can into the table top, Cam cut a plywood disc that fit snugly inside the opening of the trash can.  We did this to prevent the plastic from flexing and potentially shearing off the concrete.  I drilled holes then screwed the sides of the trash can into the wood disc.

Red House West//DIY Concrete Pedestal Table

This, alas, is me. Providing evidence of why I blog about my house and not fashion.

Once everything was attached I used the orbital sander to rough up the plastic and wood so the concrete would have something to grab on to, then I put down a tarp in our living room, mixed up some Ardex Feather Finish, and used a putty knife to coat the base of the table. Red House West//DIY Concrete Pedestal TableWorking on a rounded, vertical surface was a new challenge.  I was way too heavy handed with my application of the first coat, which made the texture uneven – even after it dried and I gave it a vigorous sanding.  After wiping it clean, I put a second coat on, let it dry, then sanded again (the making of this table stretched over a couple of days).  Then I flipped it over and used a scraper to smooth out the chunks that were clinging to the edge. Red House West//DIY Concrete Pedestal Table Red House West//DIY Concrete Pedestal TableI then put a dollop of Ardex on the top and – with much more ease than with the base – gave it two coats (again, with dry time and sanding in between).  Getting a clean finish on the rounded edge was challenging, but I found that smoothing it with my finger while it was still damp helped. Red House West//DIY Concrete Pedestal Table When everything was dry I gave it a final sanding, wiped it clean, then applied a coat of Minwax Polyacrylic as a sealant.  And here she is, my lovely little uniped: Red House West//DIY Concrete Pedestal Table Red House West//DIY Concrete Pedestal Table Red House West//DIY Concrete Pedestal Table Red House West//DIY Concrete Pedestal Table While it’s not exactly family heirloom quality (being made from a plastic trash can and all), I’m happy with how this table turned out.  It’s sturdy, fits the space perfectly and only cost me $5.  And in case you were wondering what Dean’s contribution was, here are some outtakes from photographing the table.  He’s such a helper! Red House West//DIY Concrete Pedestal Table Red House West//DIY Concrete Pedestal TableHave a great day!

Katie’s House: Progress in the Laundry Room and a DIY Concrete Backsplash

I’m excited to show you the progress we’ve made so far in the laundry room! Covering the dingy yellow walls with bright white paint ranks as one of my most satisfying home projects, even if it was among the easiest. Please keep in mind that this is a ‘progress’ post, not an ‘after’ post. There is still a lot to be done in this room, but take a look at how far it has come.

From before:

Laundry Room light bulb with text

To now:

Laundry Room Progress with DIY Concrete Backsplash

Much lighter and brighter, right? More of a place that feels like you can clean some things, rather than a room that needs to be cleaned? Here’s the list I shared when I posted about my plans for this room, with the things we’ve already completed crossed out:

  • Tear up the yellow linoleum and replace it with VCT tiles in a deep blue
  • Replace the open shelving over the washing machine with a cupboard
  • Make a backsplash for behind the washing machine (I’m fine-tuning a way to DIY something similar to the encaustic tiles. Failure or not, I’ll let you know here).
  • Paint the walls white
  • Create some kind of closed storage for shoes, grocery bags, hats, mittens, etc.
  • Relocate table to somewhere else and move the bench under the windows

I decided to wait a little longer on the floors.  The shade of blue in my head doesn’t exist in the VCT tile world, so I’m going to do some more research and see if I can find something comparably priced (though it’s not likely, at $0.79 a square foot) that I like.  The other uncompleted item on the list – creating closed storage for shoes, bags and sundries – is actually underway (the top of it is visible in the picture below), but there’s quite a bit of work to do before it’s ready to share here.

Laundry Room Progress with DIY Concrete Backsplash

In the way of all lists (and all home projects), for every item crossed off there is at least one new one to take its place.  Here are a couple of things missing from that first list:

  • Hang hooks for jackets
  • Replace utility sink or aesthetically improve the existing one (the hunt continues)
  • New light fixture
  • Change light switch toggles to white ones (there is a mix of beige and white ones and, even though it’s a laundry room and I don’t overall mind it a little mismatched and funky, I’d rather have them be white to blend in with the walls).

It’s more fun to talk about what we did get done though!  I painted the walls Pure White by Valspar and gave the door into the garage a couple coats of Newburyport Blue paint by Benjamin Moore.  Cameron built the cupboard with materials we already had (Cameron hoards construction materials like I hoard beautiful, broken chairs) using this Ikea one as loose inspiration. The main element we liked was the slatted doors, which I – much like Mera with the bead board in her bathroom renovation – thought would give some visual interest to a wall of white.  The pretty hardware is from Anthropologie, and I love the size and color of the knobs.

cupboard hardware detail

Now for the backsplash:

There has been a spate of recent online tutorials about using a concrete product called Ardex Feather Finish to cover outdated kitchen counters (you can see some great examples over at Kara Paslay Designs, Little Green Notebook and Young House Love).  If we still lived in our old house, with its bilious Formica countertops, I would be all over it.  As it was, I hoped to use it to imitate the encaustic cement tiles I so adore:

I found the Ardex Feather Finish at our local hardware store.  It came in a ten pound bag and cost $18.99.  I have lots left over (if not quite a literal ton, certainly a figurative one), and my brain is teeming with ideas of other things to make.  As a base for the backsplash, I used a piece of cement board – which is usually used as a tile backer – that we had already (see parenthetical note about Cameron hoarding construction materials above).  Before I applied the cement, we cut two holes in the board where the washing machine hoses would go, so we wouldn’t have to drill those out later.  I laid it out on two saw horses – this project was made easier because I was able to work entirely on a horizontal surface and entirely outside, making clean up much easier – and mixed up the concrete following directions on the package (a roughly 2:1 ratio of water to powder).

No need for buckets and trowels; I used a plastic container and spoon.

No need for buckets and trowels; I used a plastic container and spoon.

Though I was nervous at first, applying the concrete was straightforward and went very quickly.  I applied a thin coat (it took less than ten minutes) then washed out my supplies and let it dry overnight.

A process so easy you can do it while drinking a beer! (and dressing like a schlub)

A process so easy you can do it while drinking a beer! (Or awkwardly holding one to illustrate a point*)
*Mera called to ask whether Cameron was wearing the Carhartts she gave me ten years ago.  Folks, that is ME.  Schlubby clothes, massive forearm muscles and all.

The next day I sanded it down and then applied a second layer, being more careful this time to make it as smooth as possible.

sanding the concrete

Applying the second coat of concrete

Applying the second coat of concrete

And that’s it!  When the second coat was dry, I just sanded it smooth and wiped it off so I’d have a clean surface for stenciling.  The entire process took about half an hour of work time, including clean-up, and – seriously – a monkey holding a beer could do it.

Before I made the stencil I spent some time wandering around the Internet, looking at tiles and envisioning how I could recreate them.  Then I drew up a pattern and tried out different colors using Powerpoint.  I’m sure there are lots of programs better suited to this kind of thing, but I have spent an inordinate amount of time making Powerpoint presentations and so for me this was by far the quickest, easiest option.

ppt slide patterns

Because the area I was covering was relatively small, I cut just a single pattern piece, rather than rows of them like in the computer image above.  I made the stencil using a piece of a plastic sheet I got at the craft store (I don’t remember the particular name of the plastic, but if you are interested leave a note in the comments and I’ll track it down) for less than $3.  It worked perfectly; it was stiff enough to make crisp lines but still pliable, strong but not brittle.

I used the tape to stick the stencil to the board when I was painting so it wouldn't move around

I used the tape to stick the stencil to the board when I was painting so it wouldn’t move around

I used blue paint I already had around – Hale Navy by Benjamin Moore – and just made my way from left to right along the length of the board.  At the end of each row I washed the stencil with soap and water and then blotted it with a towel before beginning the next one.  When the blue had dried (it didn’t take long), I used a square stencil and white paint (the same shade I used on the walls – Valspar’s Pure White) and filled in the centers.

blue stencil down

I didn't have a stencil-specific brush, so I used this thick-bristled kid's one ($1.50 at the craft store) and trimmed all the bristles to the same length.

I didn’t have a stencil brush, so I used this thick-bristled kid’s one ($1.50 at the craft store) and trimmed all the bristles to the same length.

After the paint was completely dry, I applied two coats of Minwax Polycrylic in clear satin to protect it from water.  It was just what we had around, and I’ll let you know down the road how everything is holding up. I have already splashed water on it, as well as paint when I was doing some touch-ups, and it wiped right up and looks just fine.

We installed the backsplash by screwing strips of wood the same depth as the board into the wall below and above it, and then nailing trim pieces that overlapped the backsplash into those strips.  That way we didn’t have to drill directly into it and risk cracking the concrete.

DIY concrete backsplash

Holy cow that faucet is heinous – BUT – after doing all this painting/cementing without having the utility sink operational, I’m grateful for it. In this case, function > form, though I’m hoping to find a sink and faucet that have both.

DIY concrete backsplash

So let’s just take one more quick trip down memory lane:

Laundry Room before cropped


And then marvel at how far we’ve come:

Laundry Room Progress with DIY backsplash

Thanks for reading this post!  Please feel free to ask any questions you may have in the comments.  Come back on Friday when Mera and I will be doing a round-up of DIYs we’re dying to try and, though we’re taking a break from the Good Score post this week, don’t forget to submit your own Good Scores (either to redhousewest@gmail.com or by using the hashtag #rhwgoodscore) so you’ll be eligible for the giveaway!